Looking back 80's and 90's
Content on those pages were taken from http://cpm80.z80.de, Tim Olmsted's memorial library archive pages. Mainly for my own reference and also for web page formatting practice. There are only manual pages sections here. See the source site to obtain more detailed information on CP/M.
COPYRIGHT
Copyright © 1976, 1977, 1978, 1979, 1982, and 1983 by Digital
Research. All rights reserved. No part of this publication may be reproduced,
transmitted, transcribed, stored in a retrieval system, or translated into any
language or computer language, in any form or by any means, electronic,
mechanical, optical, chemical, manual or otherwise, without the prior written
permission of Digital Research, Post Office Box 579, Pacific Grove, California
93950.
This manual is, however, tutorial in nature. Thus, the reader is granted
permission to include the example programs, either in whole or in part, in his
own programs.
COPYRIGHT addendum
As of 2022, distribution of CP/M material is granted by it's new owner, Lineo inc., See here
DISCLAIMER
Digital Research makes no representations or warranties with respect to the
contents hereof and specifically disclaims any implied warranties of
merchantability or fitness for any particular purpose. Further, Digital
Research reserves the right to revise this publication and to make changes from
time to time in the content hereof without obligation of Digital Research to
notify any person of such revision or changes.
TRADEMARKS
CP/M and CP/NET are registered trademarks of Digital Research. ASM,
DESPOOL, DDT, LINK-80, MAC, MP/M, PL/I-80, and SID are trademarks of Digital
Research. Intel is a registered trademark of Intel Corporation. TI Silent 700
is a trademark of Texas Instruments Incorporated. Zilog and Z80 are registered
trademarks of Zilog, Inc.
The CP/M Operating System Manual was printed in the United States
of America.
First Edition: 1976
Second Edition: July 1982
Third
Edition: September 1983
Table of Contents
1 - CP/M Features and Facilities
2 - ED
3 - CP/M Assembler
4 - CP/M Dynamic Debugging Tool
5 - CP/M 2 System Interface
6 - CP/M Alteration
Appendices
A - The MDS Basic I/O System (BIOS)
B - A Skeletal CBIOS
C - A Skeletal GETSYS/PUTSYS Program
D - The MDS-800 Cold Start Loader for CP/M 2
E - A Skeletal Cold Start Loader
F - CP/M Disk Definition Library
G - Blocking and Deblocking Algorithms
H - Glossary
I - CP/M Messages
Back to Mirrored source
Next